Actros L: Established flagship for traditional long-distance haulage with even higher fuel efficiency and more dynamics thanks its improved drivetrain
Mercedes-Benz Trucks has once again set new standards in the traditional diesel trucks premium segment with the Actros L presented at this year’s IAA Transportation trade fair in Hanover. The top-of-the-range model of the successful Actros series produced since November 2021 once again underlines the claim of Mercedes-Benz Trucks to always focus on the needs of its customers and their drivers. The fact that the Actros L caters for a high level of driver comfort is also emphasised by the driver’s cab with its width of 2.50 metres, available as StreamSpace, BigSpace and GigaSpace variants. The flat floor in the cab creates a cozy ambience. The improved sound and heat insulation reduces the noise level and makes the time spent in the cab even more pleasant – both when driving and during rest stops.
The third-generation 12.8-litre OM 471 engine for heavy-duty commercial vehicles is an example of further optimised fuel efficiency. The new engine available in the Mercedes-Benz Actros L from October 2022 features a vast range of technical innovations that are consistently aimed at reducing the total cost of ownership (TCO) with regard to fuel-saving driving, reduced CO2 emissions, lower operating costs, and higher margins, without affecting performance, vehicle dynamics or driving comfort. On the contrary: As one example of many, the third generation of the OM 471 engine introduces a consumption-optimised turbocharger, which, together with the revised exhaust gas aftertreatment system, enables maximum fuel savings of up to 4% compared with the previous generation. Another highlight of the third-generation OM 471 engine is the extended Top Torque program, providing more performance exactly when it’s really needed – for example when driving onto a motorway or when overtaking. For enhanced vehicle dynamics, Mercedes-Benz Trucks has also focused on the whole drivetrain: For example, the new PowerShift Advanced automated transmission control enables faster and smoother moving off and acceleration in many scenarios thanks to its precision gear selection.
The new drivetrain is available for all heavy-duty Mercedes-Benz truck series: from the Actros to the Actros L and the Arocs.
Supporting driver assistance systems and a second generation MirrorCam1
In addition, safety assistance systems such as the fifth-generation Active Brake Assist with pedestrian detection (ABA 5), Lane Keeping Assist and the second-generation MirrorCam, or the equipment options of the second-generation Active Drive Assist (ADA 2) for partially automated driving to Level 2, or Active Sideguard Assist (ASGA), also make important contributions to safety.
Under certain circumstances, ADA 2 can actively support the driver with longitudinal and lateral guidance of the vehicle, and automatically maintain a distance, accelerate, and steer if the necessary system conditions, such as an adequate curve radius or clearly visible roadway markings, are in place. In addition, the Emergency Stop Assist sub-function included in ADA 2 is capable of initiating an emergency stop (within system limits) if, despite visual and audible warnings, the steering wheel is no longer being held by the driver.
ASGA, which is currently available for left-hand-drive trucks, is not only able to warn the driver of moving cyclists or pedestrians on the front passenger side, but can also initiate automated braking up to its own turning speed of 20 km/h until the vehicle comes to a standstill if the driver fails to react in time.
Active Sideguard Assist uses the MirrorCam display on the front passenger side to provide visual warnings. The second generation of the mirror camera system has been in use since April 2022, and it can now provide the driver with even better support in many situations in road traffic thanks to camera arms that are ten centimetres shorter and new imaging parameters. One of the benefits of shortening the camera arms is that the drivers can now reverse in a straight line more easily than with the first generation. This is mainly due to the fact that the perspective of the MirrorCam is now even more similar to that of the usual glass mirror.
The evolution in the colour and brightness coordination of the camera system, which was originally designed to be very bright, means that the displays, for example when reversing into a dark or poorly lit warehouse, depict the area relevant to the driving situation even more precisely. Thanks to its supportive effect, the enhanced MirrorCam system can now assist in managing situations such as overtaking, manoeuvring, driving in poor visibility and darkness, cornering, and passing narrow spaces even more safely and without stress.
The optionally available LED headlights offer additional safety – especially in darkness or poor visibility – thanks to their higher light intensity compared with xenon headlights and very good illumination of the roadway.
Actros Edition 3: Unique design and superior comfort
As a limited special model of the Actros L with a “Wow!” effect, Edition 3 is also being showcased at the IAA Transportation 2022 trade fair in Hanover. Up to 30 additional interior and exterior features as well as design elements stemming from Edition 1 and Edition 2 give the 400 production run truck an unmistakable character. The luxury of the Edition 3 is marked by a whole range of equipment features. In its stylish interior, these include the instrument panel and door handles in nappa leather, various interior parts with a carbon fibre look, and the roof hatch with its ambient lighting. The Edition 3 badge on the front passenger side and the illuminated “Edition 3” entry badge on the driver and front passenger sides are also eye-catching. The top bunk comes with bedding and is 900 millimeters wide. An all-round curtain – almond beige on the inside, black on the outside – ensures stylish privacy. The same applies to the curtain with the Mercedes-Benz star in front of the bunk.
Highlights on the exterior include the exclusive decals on the side wall, the “Edition 3” lettering in the white aluminum sun visor with two additional LED headlights, the Actros emblem at the front in dark chrome, and the Actros lettering on the upper rear cab wall. The stainless steel entry steps are striking features on the side of the vehicle. The front and rear axle caps are also made of stainless steel. The scope of delivery also includes the illuminated Mercedes-Benz star in dark chrome, several painted decorative grille applications made of stainless steel, and the aluminum steps in the side trim.
Edition 3 is available for all two- and three-axled models of the latest Actros L generation with GigaSpace and BigSpace cabs in left- and right-hand drive versions. The cab paint finish is freely selectable and can be adapted to customers’ liveries, while the front of the vehicle is always painted in white aluminium metallic to guarantee a high recognition value. Whether it’s high-end power with the 15.6 litre OM 473 engine or further reduced consumption with the new OM 471 engine in its third generation, thanks to improved gearshift performance by PowerShift Advanced for all available drivetrains the Actros L Edition 3 offers all drivers impressive performance and a high level of driving pleasure.
Smart digital solutions for even more efficient use
In order to maximise the use of all Actros models and save time and administrative effort, Mercedes-Benz Trucks provides its customers with a whole range of digital solutions on the Fleetboard portal. Another digital solution is provided by the mapping tool, which enables back office employees in transportation companies to react quickly to the current vehicle status wherever necessary. This is because the tool shows where a vehicle is currently located and whether it is moving or stationary in real time. Another tool is a logbook with detailed information on driving times and non-operational times, total weight, mileage covered, route progress and topography. This allows fleet managers to subsequently track each individual Actros in the company so that use can be optimised when parlaying with the driver or dispatcher.
The HABBL logistics application stands out because it steers drivers step-by-step through their work orders. The app can be used in parallel on the Actros Multimedia Cockpit and any Android mobile device for tasks outside the vehicle. All those involved in a transport process – drivers, dispatchers and customers – can always obtain the available information they need. This increases process quality and at the same time creates a high degree of transparency.
Mercedes-Benz Uptime: Improved vehicle availability for the Actros
Mercedes-Benz Uptime combines intelligent vehicle networking with intensive customer support and thus offers Mercedes-Benz Trucks customers an innovative service product. The aim is to support customers in reliably fulfilling their transport orders by making sure the truck spends as much time as possible on the road. Workshop visits must be minimised and planned more efficiently. In order to reduce breakdowns, repair requirements can be identified as early as possible and customers can be supported in organising the necessary work at short notice – always taking into account their deployment planning. The results: Improved planning of workshop visits, increased vehicle availability, and a higher level of road safety.
Truck Data Centre is at the heart of Mercedes-Benz Uptime and also the basis for other vehicle connectivity solutions. The networking module receives data from the sensors, cameras, and control units in the truck and evaluates it for different applications. The Truck Data Centre not only forms the basis for the numerous services of Mercedes-Benz Uptime, but also for Fleetboard, the service for sustainably increasing vehicle availability.
Mercedes-Benz Trucks also offers its customers various repair and maintenance contracts at monthly predictable costs to ensure the highest possible vehicle availability and the lowest possible number of breakdowns. Mercedes-Benz Complete provides peace of mind as a comprehensive service package covering all workshop tasks, including replacement of wear parts.
Mercedes-Benz Uptime is available as standard in the Mercedes-Benz Complete service contracts. The comprehensive service package covers all workshop work, including maintenance and wear parts. It starts with the coordination of appointments and extends to invoice verification. This means that you can rely on the comprehensive additional protection for your vehicle – for maximum value retention and mobility.
1 With all these assistance systems, Mercedes-Benz Trucks aims to provide drivers with the best possible support when driving the vehicle within the system limits. However, the driver remains fully responsible for driving the vehicle safely at all times, as is also required to do so by law.